OVERVIEW
Ophit’s Newly launched wallplate video signal converter, WMC-SD, is an MPO/MTP-type wall plate video signal converter that converts 12G-SDI TMDS-compatible optical signals, delivering maximum resolution up to 4K (4069 x 2160) @ 60Hz without signal degradation.
The newly launched wallplate video signal converter connects to the OMP-HM (Receiver) via MPO-type optical cable for up to 100m (330ft) of uncompressed data transmission. Specifically designed to be mounted in a single gang enclosure, the WMC-SD offers high-speed video signal transmission solutions for surgical boom systems in the OR suite.
▪ Supports HDMI 2.0
▪ Supports SDI interface standards from HD-SDI to 12G-SDI
▪ Equipped with two LEDs to indicate the status of input and output
▪ Transmits a converted optical signal using one MPO-type optical cable
▪ Designed to mount in a single gang sized slot
▪ Equipped with one push switch to reset system
OTHER APPLICATIONS
▪ Broadcast / Control Room / Large Auditorium / Live Stage / Medical Imaging / Military / Flight Simulation / Conference Room
TECH SPECS
▪ Fiber Cable: MPO/MTP, 8 (or 12)-core, OM3, 50/125μm multi-mode fiber
▪ Input Data Rate: Up to 11.88 Gbps (ST020820-1, 12G-SDI)x
• Output Data Rate: Up to 18 Gbps (HDMI 2.0)
▪ Optical Connector: 1 x 4 Array 850nm VCSEL, 1 x VCSEL, 1 x PD
▪ Input Signal / Connector: 1 x SDI via BNC Female Connector
▪ Output Signal / Connector: 1 x MPO-Type (Optical Female Connector)
▪ Video Resolution: Up to 4K@60Hz
▪ Power Consumption: 1 x External Power Supply (DC +5V to +12V)
• Power Connector: 1 x 3.5mm (0.14″) Pitch 3-Position Terminal (JIEKT / JK35OR-03P)
CONFIGURATION
***NOTE: The Installer must supply power to the WMC-SD (Wall Plate)
